By Terri Williams |
According to the National
Fire Protection Association (NFPA), electrical malfunctions are the second
leading cause of residential fires in the U.S. Your electrical outlets can be a
source of these fires, if they’re not being used properly.
Now that we’re spending
more time at home, most of us are also spending more time in the kitchen. You
may be making coffee, while someone else is microwaving a meal, and yet another
person is using the toaster oven.
And then, we’re all
charging our laptops, tablets, and phones, watching TV, and playing video games.
“As many of us continue to
work from home, having a reliable productive set up is important,” says Eamon
Lynch, director of warranty service at PowerHome Remodeling, a full-service exterior home remodeler. “I recommend
testing your home’s outlets and electrical current to make sure everything is
in working condition.”
Test your electrical
current
Lynch recommends using a
hair dryer to help you check your outlets. “Grab your hair dryer, plug it into
an outlet you know is functioning properly, and turn it on,” he explains. “Once
you’ve determined that your hair dryer works properly, you can then plug it
into different outlets in your home to test which ones are working.”
He admits that you could
use other small appliances to test your outlets. “However, I like to use a hair
dryer because you can quickly hear it and identify any outlets that need to be
replaced.”
You can also use a
multimeter, but if you have any reservations about how to use it, contact a
qualified electrician, since they have the experience and tools to make the
right diagnosis.
Use a power strip
“Having too many things
plugged into your outlets can cause the possibility of overheating or over
exposure,” Lynch says. He recommends using a power strip with a built-in
interrupter to prevent fires. “Essentially, the strip would automatically shut
down if there was an issue with your home’s electric breaker and reduce the
likelihood of a spark.”
However, the NFPA warns
against using power strips and extension cords with major appliances, such as
washers, dryers, refrigerators, stoves, air conditioners, and microwaves. You
should plug these items directly into the outlet.
Limit the number of
items plugged into an outlet
When you’re using
appliances that produce heat, such as a space heater, coffee maker, toaster,
toaster oven, or air fryer, you should only plug one item into the wall outlet
(even though there’s space for two).
Also, never alter or try to
force cords into an outlet. If you have a three-prong cord, don’t try to make
it fit into a two-slot outlet.
Keep furniture away
from your outlets
“It’s important to protect
your cords and wires from bending too much,” Lynch advises. “This is especially
true if you have furniture that pushes up against the plug and the wall,
creating a hard bend in the cord.” When wires are pulled tight, he warns that
this could lead to exposure and become a fire hazard.
Also, make sure that you’re
not running cords under carpets or across doorways. Cords under carpets can get
too hot. On the other hand, when you run cords across doorways, they can be
stepped on and damaged.
Signs of electrical problems
According to the NFPA,
there are several warning signs that you may have an electrical problem. For
example, if you keep blowing fuses or tripping circuit breakers, you should
contact an electrician to investigate.
Just looking at your wall
outlets can also alert you to problems. If the outlet or the area of the wall
surrounding it is discolored, it could mean there’s an overheating problem. If
you touch the wall outlet and it feels warm, that’s another sign to get the
outlet checked out. Needless to say, sparks would indicate a problem that
requires immediate attention.
However, there are other
problems that you may be able to detect aside from observing the outlet. For
example, if you touch an appliance and you get a tingling sensation, that’s
cause for concern. Another warning sign is either a burning smell or a rubbery
smell emitting from the appliance.
Also, if the lights flicker
or dim, you should contact an electrician. Another tip with light bulbs: always
ensure that you’re using the correct wattage. Some table lamps require a
40-watt bulb. That’s not a suggestion. You shouldn’t use anything with more
wattage (like a 60- or 70-watt bulb) because the fixture could overheat.
Terri Williams is a
freelance journalist with bylines at The Economist, USA Today, Yahoo, the
Houston Chronicle, and U.S. News & World Report. Connect with her on
Twitter or LinkedIn.
[Wk1003mike]/Shutterstock
Media Contact:
Deborah F
Communications Manager
6860 North Dallas Parkway, Suite 228 | Plano, TX 75024
mailto:heba@admin.saveonenergy.com
Website: www.saveonenergy.com